A CS CavitySlider is a functional and efficient alternative to conventional surface sliding or hinged doors. Our cavity slider units enable a door to slide inside the wall leaving the floor and wall space on both sides clear and unobstructed.

Overtaking x5Doors are supplied with extra wide cavities able to accept five doors side-by-side in the same cavity. The purpose designed collection system means that only the lead door needs to be drawn from the cavity - trailing doors follow in perfect order. Overtaking x5Doors are supplied as a fully assembled unit ready to install on site.

Although the cavity depth is only one door width deep, the walk-through can be up to five door widths (5xDoors), as in this case. They make ideal room dividers in residential and commercial buildings. CS Overtaking units can be manufactured to accept 2, 3,4, or 5 doors side by side. Bi-parting options are also available.

Overtaking x5Doors may also be combined with other products, including:

Full-HeightDetail: An architectural detail where there are no head jambs and the flat bottom section of the tracks (2,3,4 or 5 of them) finish flush with the underside of the ceiling. This detail is aesthetically pleasing and ideal for room dividing applications.

CornerMeeting: Instead of the leading doors of a bi-parting unit meeting in the same plane, they meet at an angle to each other, usually at 90 degrees.

Applications:

• Room dividers in residential houses.  
• Large room dividers in commercial buildings such as boardrooms, meeting rooms, bars and restaurants.
• Bar doors – doors to slide across the bar area for security purposes. 
• Perfect for schools to divide off large halls into two different activity areas.

CS Overtaking x5Doors
Design Features & Options:

• All units fit into standard timber stud sizes.
• All tracks are smooth running, extruded aluminium with no joins along their length.
• No visible guides on the floor or in the opening.
• Doors are very easy to open and close unlike some other types of room dividing systems.
• Suitable for use as serveries etc.
• Available with either timber or powdercoated aluminium jambs.
• Purpose designed track and door collection system.
• The patented cavity frame is engineered from high quality heavy duty extruded aluminium.
• All aluminium components are screwed together for strength and reliability.
• Pine nogs, skirting and split jamb blocks are fitted to the aluminium frame for ease of fixing gib board, skirtings and architraves.
• Timber blocks for nailing architraves are fitted to the aluminium split jambs when using the timber jambs only.
• Fully tested and guaranteed.
• Door and carriages can be removed without removing wall linings.
• Door cannot jump off the track.
• Designed to fit into a standard thickness wall (290 x 45 Kiln Dry). 
• Able to take standard and non-standard size doors.
• Door guides are not visible on installed units (various door guide options available).
• Supplied fully assembled for on-site installation.
• Nogs offset to allow nailing of incoming wall. Extra nogs can be easily fitted.
• Aluminium backstud and aluminium bottom plate are pre-drilled for fixing on-site.
• Available as single or bi-parting double units with or without door fitted.